|
THERMO-OFF
Runs another Z-Cron job if the measured temperature is above a specified value. You can use this command to regularly measure the temperature (e.g. every 5 minutes) and then activate a fan or an alarm if it is too hot.
This is a simple way to monitor the temperature in a server room, for example. You can use the Z-Cron ALARM command or connect a fan to our USB Switch Socket which can then be activated with the POWER-ON command.
THERMO-OFF
This command runs a Z-Cron job if the temperature drops below a given threshold. You can use it to switch the activated device off again.
|
